Kraun KR.UL Manuel d'utilisateur télécharger pdf (Page 29)

Manual

www.kraun.it

7.5.2. RS232 CABLE SPECIFICATIONS

When connecting the UPS with PC by RS232 cable, it needs to use the standard RS232 cable, the de-

tailed cable NO. are as following:

PIN 1 (hole) to computer serial port PIN 2 (needle) to UPS serial port

2 2

3 3

5 5

7.5.3. OPTIONAL COMMUNICATION INTERFACE

1. USB communication interface

USB communication interface: Install the intelligent monitoring software UPSilon2000 which is

equipped with the UPS. Then it can achieve the communication with monitoring device directly. When

RS232 and USB are provided, only one of them will be chosen and USB is preferred.

2. Intelligent slot

The following intelligent cards can be installed into the intelligent slot of the UPS: intelligent USB card,

intelligent SNMP card and intelligent dry contact card. Support the hot plug and play. Any card of them

can be used according to users’ requirements.

A). Intelligent USB card: Use the monitoring function of the USB interface system to monitor and man-

age the power source of the UPS.

B). Intelligent SNMP card: When connecting to the internet by SNMP card, it communications with the

monitoring computer to monitor power source of the UPS from far end.

C). Intelligent dry contact card: Use the monitoring function of the dry contact interface system to

monitor and manage the power source of the UPS.

ault Codes

1 2 ... 24 25 26 27 28 29

Pas de commentaire

Kraun KR.UL Manuel d'utilisateur Page 29